Send Email
Send SMS
Search
Front Line Roll Forms Private Limited
Front Line Roll Forms Private Limited

Home »

Introduction & Profiles

The setting up of 'Frontline' in 1993 was in continuation of a pioneering effort in India initiated in late seventies by our Promoter Mr. C. S. Chadha. As a part of the team in his earlier venture, credit goes to him for indigenously developing for the first time in India, the concept of Cold roll forming sections for structural applications in construction Industry. Starting with their use as secondary members like Zed Purlins and Side cladding runners, in due course adequacy of their technical soundness for use as primary members like columns and rafters was established through an association with one of the most reputed technical institutions LIT. Mumbai. Mr. Chadha carried on further the process. Today Frontline manufactures the best designed, highest quality and most efficient low rise non-residential prefabricated buildings suitable for manufacturing units, warehouses, offices, schools and sport clubs etc. They ideally blend precise computerized design and advanced manufacturing technology to give you value for your money. A number of our buildings of a wide range and variety bear ample testimony to our claim of design adequacy, functional convenience and aesthetics. Span upto 30 meters, Column Spacings upto 24 meters, Heights upto 20 meters and Crane gantries of 2 Nos. of 25 MT each are some of the engineering feats already achieved by us.

When you opt for a Frontline building you are saved with the hassles associated with onsite fabrication, because our manufacturing facilities aided by a highly qualified technical staff and skilled manpower translate the computer fabrication drawings into precision quality controlled building systems and factory performed components arrive on job site ready to erect thus substantially reducing onsite time. Similarly adding new sections to a wide range and variety already available with us, has become a routine affair. We are thus able to identify new end uses and extend to them the advantage of the technologies in enhancing productivity and efficiency through optimal use of steel. In order to grasp fully the meaning of our slogan "We are different in field of customized pre-engineered buildings". The following few examples may highlight our claim.

i) In case of one of India's feeding engineering unit Thermax, they wanted a mobile shed with wide span of 12 mtrs. and height of 11 mtrs. to be installed at JNPT Port with wind velocity of 150 kg/m without "CIVIL FOUNDATION". We successfully developed and offered a solution working well for more than years.

ii) M/s. Uttam Galva steels Ltd. wanted a column located at the spacing of 12 meters to be eliminated. In other words in two bays the spacing became 24 meters instead of normal spacing of 12 meters. This in a building with a span of 12 mtrs. and height of EOT crane at 7.5 mtrs. We very convincingly solved their problem.

iii) M/s. Grow Well Mercantile Pvt. Ltd. building was ready with erection about to start. At last moment the client desired crane capacity in part of shed to be raised from 15 MT to 35 MT. A solution was offered by raising partly the height and crane capacity by creating 2 height levels.

iv) On many occasions, we were required to offer solutions for joining our buildings with the columns and other structures of the existing buildings, fabricated out of conventional hot rolled structurals and even install Crane gantries. All such situations were effectively tackled by our competent design teams.

Company Profile

Basic Information
IndiaMART TrustSeal
Nature of Business
Manufacturer
Additional Business
  • Exporter
  • Wholesaler
  • Trader
  • Supplier
  • Distributor
Company CEO
Sanjay Khuteta
Registered Address
No. A-209, Arenja Corner, Sector 17, Vashi Murbad, MIDC, Navi Mumbai - 400 703, Maharashtra, India
Total Number of Employees
26 to 50 People
Year of Establishment
1993
Legal Status of Firm
Private Limited Company

Sanjay Khuteta
Annual Turnover
Rs. 10 - 25 Crore
Statutory Profile
Tan No.
MUMF0*****
Banker
  • AXIS BANK
  • PUNJAB AND MAHARSHTRA COOPERATIVE BANK
  • AXIS BANK
GST No.
27AAACF0956D1ZY
CIN No.
U29290MH1993PTC073370

Client List

Client List
Whereas our client list consist of some of the leading names in the corporate world in their respective fields, our biggest assets lies in our success in securing their total satisfaction and a life long relationship. Most of our customers have either placed repeated orders or have recommended our name to their associates and acquaintances.
  • Uttam Galva Steels Ltd.
  • Shree Pre-Coated Steels Ltd.
  • Thermax Babcock and Wilcox Ltd.
  • Hyva India Private Limited
  • Hb Esmech Private Limited
  • Grow Well Mercantile Pvt. Ltd.
  • Stokota (E) India Pvt. Ltd.
  • Consite Engineering Co. Ltd.
  • Jinabakul Forge Private Limited
  • Bharat Springs ( Atgaon }
  • Poonawalla Group Of Stud Farm
  • High - Tech Dairy India Pvt. Ltd.
  • Poshs Metal Industries Pvt. Ltd.

Where We Design the Best Shapes


i) Cold roll forming is the most efficient method of converting sheet steel into desired shapes through a gradual process of bending by a number of specially designed rolls mounted on a cold forming mill. The technology has many advantages over the conventional press brake method of forming namely:

ii) Cold working capitalizes on the steel's tendency to become harder and stronger when formed while cold. This gives an added advantage to cold formed sheet steel because the shaping process actually makes the part stronger. It achieves a better consistency and accuracy of profile.

iii) The possibilities of producing the variety and range of shapes are almost unlimited, determined only by the number of stations available on the mill and the ability of the tool designer. Indeed some shapes can not be produced by any other method.

iv) Cold roll formed sections do not suffer from the length constrains and can be supplied to your exact requirements. In addition to the universal profiles, like channels and angles, the cold-formed sections offer tremendous potential for cutting cost, through superior design of shapes and flexibility of sizes.

v) We, at Frontline, have the ability to design and also have manufacturing capacity to offer many innovative solutions in specific application areas, like factory building structural, conveyor systems, material handling, pallet racking systems, porta cabins and truck chassis members etc.

Where Innovation is An Obsession And Performance Is A Passion, Ask Us

We shall try to answer any thing about every thing & Every thing about any thing in FRONTLINE PRE-ENGINEERED BUILDINGS. Time was when factory shed meant columns, Trusses and Purlins all fabricated out of conventional structural members like Girders, Channels and Angles. They would offer limited options to the designers to improve on productivity, which creative minds found difficult to accept.

Hence a totally new concept was evolved to offer solutions by converting high tensile, high yield plates and sheet into the structurals, promising optimal use of raw material through flexibility of sizes, made possible by cutting and joining plates for fabricating beams (3 plate technology) and Cold rod forming of Strip steels. These Pre-Engineered buildings offer a great scope for creativity resulting in technically sound and economically competitive alternative. This precisely is what we are out to offer when you need a building for industrial or commercial use. These buildings are high quality, factory built, timely delivered, aesthetic pieces and are proven money savers.

Why Us?

Why Us?
i) Because our designs are ISI code complaints, which are a guarantee for perfect design adequacy safety and longevity. We use specifically recommended high yield, high tensile tested material including prefabricated structure, cold roll formed steel sections, ceiling furring system, section beam, z-section, hat section, z-purlins, heavy duty channel, light duty channel to reinforce your faith and confidence in us. In other words we do not cut corners and compromise on the design aspect. 

ii) We do not believe in prototype and offer tailor made solutions to attend to the minutest details of your individual and specific requirement in respect of any or all parameters. 

iii) Time bound commitment is another one of our strengths. We involve all the teams connected with the execution of the project to ensure that any lack of co-ordination on our part do not cost our clients dearly. So ail those who place orders on us can breathe comfortably that there will be no time or cost overruns due to our failures. 

iv) Like design, quality is also our equally important strength. All the components during fabrication and at the time of dispatches are strictly checked for high quality fabrication and error free dimensions to ensure smooth and fast erection at site. 

v) We charge competitive prices because we have an excellent system of cost control in place. Our productivity is high, overheads are extremely low and we pass on the benefits of these to our clients, which does not mean any compromise with quality and workmanship.

 


Contact via E-mail
Contact via SMS
Front Line Roll Forms Private Limited
Sanjay Khuteta (CEO)
No. A-209, Arenja Corner, Sector 17 , Vashi,
Navi Mumbai - 400703, Maharashtra, India
Call Us: 
Call Response Rate: 93%
Share Us :
F G T L



© Front Line Roll Forms Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Front Line Roll Forms Private Limited